North Richland Hills, TX
New Roof Cost in North Richland Hills, TX
New roof cost in North Richland Hills: what moves the number, and why nobody can quote you from the street.
Roofing cost
Measure the roof, then compare the work.
Two houses with the same living area can need very different roofing work. Roof surface grows with pitch; valleys and additions add details; old layers and damaged wood change what must be removed.
The calculator starts with current DFW contractor-published installed rates. On an example 2,400-square-foot roof surface, architectural shingles give $12,000 to $19,200. That size is a worked example, not an average North Richland Hills house.
Use the range to frame a conversation. The proposal still needs to name the actual roof area, product, preparation and details.
Reading an estimate
How to read two quotes against each other.
A large gap between two quotes may come from different products or different work. Ask where they differ before deciding that one is a better value.
Your itemized estimate
Measured area and waste
Ask whether the number is actual roof surface or ordered material including waste. That can explain a difference between proposals.
The shingle by name and rating
"Architectural" is a category. The product and its wind rating are the actual spec.
Underlayment and starter
The product and installation method should suit the selected system.
Flashing work
Compare what will be replaced or retained at walls, pipes and transitions, and why.
The decking rate
A named per-sheet price, or a blank that becomes a conversation later.
Permit, disposal and cleanup
Included, or waiting to appear as an extra.
A clear scope lets you compare prices without assuming the lowest or highest total is automatically right.
Work out a starting range for your roof
Use measured roof surface if you have it. Otherwise choose building footprint and pitch for an approximation. A two-story home’s living area is not the footprint beneath its roof.
One example roof, four material ranges
2,400 sq. ft. of measured roof surface. Dallas–Fort Worth installed planning ranges, including ordinary tear-off.
- Architectural shingles
- $12,000 to $19,200
- Class 4 impact-rated shingles
- $15,600 to $24,000
- Designer shingles
- $19,200 to $33,600
- Standing seam metal
- $28,800 to $60,000
Compare the same measured roof area across materials. Enter your own measurements below.
Use the footprint covered by the roof, including a garage or covered porch. A two-story home's living area is not its roof footprint.
Rise in inches for each 12 inches across. The default is 6:12. If you do not know, leave it as a rough assumption. Do not climb up to measure.
Your planning range
About 2,236 sq. ft. of roof surface
DFW installed ranges including ordinary tear-off. Extra layers, concealed wood repairs and difficult access change the scope.
Discuss your roof projectSource: JRH Construction’s published DFW planning ranges; not a city price survey or project quote. Updated 2026-09-07.
What the planning figures include
JRH Construction’s Q1 2026 guide publishes installed DFW bands including material, labor, ordinary tear-off, disposal and permits. The calculator applies those rates to roof surface area without adding another ordinary tear-off charge.
S&B Roofing’s April 2026 guide provides a separate package comparison using a 25-square roof. Its ranges differ; they are a cross-check, not numbers averaged into a local rate.
The pitch factor describes a simple slope. Valleys, multiple levels, overhangs and additions need their own roof measurement.
Where the money goes
What moves the price.
These variables can change the work behind the total. They are not a fixed ranking for every house.
| Factor | Pushes the price down | Pushes the price up |
|---|---|---|
| Roof size | Under 20 squares | Over 30 squares, or a cut-up plan with many facets |
| Pitch | Simpler access and geometry | Steeper or complex areas that need added staging |
| Existing layers | Ordinary single-covering tear-off | More layers to remove and dispose of |
| Deck condition | Sound fastening support | Damaged or unsound areas needing repair |
| Material grade | Standard architectural shingle | Class 4 impact-rated, designer profile, or standing seam metal |
| Access and detail | Clear drive, simple gables | Tight lot, mature trees, multiple valleys, chimneys and skylights |
Cost questions
Questions behind a roof price
The ones behind the number.
What does a new roof cost in North Richland Hills?
The current DFW published bands used here are $5–$8 per roof square foot for architectural shingles, $6.50–$10 for Class 4, $8–$14 for designer shingles and $12–$25 for standing seam. They include ordinary tear-off and are planning ranges, not this brand’s quote.
Can an aerial measurement give an accurate price?
It can help establish roof geometry, but the work also depends on condition, layers, access and specification. Some decking damage stays hidden until tear-off. Ask which assumptions remain in an early estimate.
Is a cheaper quote a worse roof?
Not necessarily. Compare named products, flashing, removal, cleanup and any allowances. A lower total may describe a different scope, but the difference needs explaining rather than guessing.
Does insurance change what I pay?
Coverage depends on the policy, deductible, depreciation and any exclusions or limits. You remain responsible for your deductible and uncovered costs. The claims guide explains the questions to put to your insurer.
Is impact-rated shingle worth the extra cost?
Compare specific products on the same roof and ask your insurer about an actual discount and any changes to terms. Lab impact classification is useful, but it does not make a roof hail-proof or guarantee the upgrade pays for itself.
North Richland Hills Roofers
Discuss the roof you want to price
Have a size or a quote you are trying to understand? Tell us about the roof. Our roofer can inspect the condition and discuss the scope worth pricing.
(817) 479-0604